2005 Buick Century "reset change oil lamp" Questions

...reset the "Change oil soon" light. Any ideas??? Turn your key to the on position wait until all of your indicater lamps do their thing . Then pump the gas pedal 3 times in rapid motion in less than 5 ...

reset button for change oil Turn the ignition to "ON", with the engine off. Slowly fully press and release the accelerator pedal 3 times within 5 seconds. The reset is complete when the chimes sound ...

reset change oil light I need to know how to reset my change oil light on my 2001 Grand Am SE. I just recently bought this and changed the oil in it and now I need to reset the light, but I don't have

reset procedure. Turn the key to "OFF". If the "CHANGE OIL" lamp comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure. There is no oil reset button

...reset. Start engine. OIL LIFE should change to 100%. If CHANGE OIL SOON lamp lights again, repeat reset procedure. 2001-08 Silverado, w/Driver Information Center Turn ignition On, but do not start ...

reset oil light the oil change lamp, not low oil pressure lamp. sounds like you lost the operators guide.????? yes, , can i suggest getting one, so not helpless? or get stranded? the guide tells you ...

...reset the oil change reminder lamp? To do this follow the steps listed. (1). With the key on but engine off,fully depress and release the accelerator pedal slowly tree times within 5 seconds.If the ...

pedal completely to floor 3 times. Change oil light should reset. oil maintenance light (oil change nag? or oil pressure loss. there are 2 lamps, and both are covered in the operators guide. lost that

...reset it. You mean the message`'oil change overdue' or the RED WARNING LIGHT looks like Aladdin's lamp? Serious problem if the RED WARNING lamp. Do not start or run it until it's looked at by ...

...RESET CHANGE OIL SOON LIGHT! The reset button is located under the passenger side of the instrument panel. With the ignition in the ON position, but the engine not started, use a pencil to push the ...