Cylinder head bolt torque specs and sequence for a 1997 buick regal V6 3.8 eng. Install the cylinder head gasket. Ensure the arrows point towards the front of the engine. The left cylinder head gasket
head bolts locations Most of them will be under the valave cover or covers depending which engine you have. They will be the larger bolt heads. Some may hidden beneath oil sludge. ...
...cylinder head are worped now and it wil nededed to take them off and sen d them to a machine shop for surface and valve job (including head cracks). new head gasket set wil be in neds for this and ...
P305 code on cylinder no.5 cylinder new plugs ,wires,fuel injector,new module and coils ,rebuilt heads and gaskets.Problem still there misfire on no.5 cylinder with PO305 code showing up. adjust plug ...
cylinder head valve arrangement I need to know which valves are intake and which are the exhaust by looking at the outside of the head while its bolted to the block. I went to replace the head gaskets
...and that is as far as i have gotten THERE IS A METAL GASKET AT THE BOTTOM OF THE CYLINDER HEAD. MAKE SURE YOU REMOVE THE HEAD AND NOT JUST THE INTAKE MAINFOLD. they are under tha heads on the
...cylinder compression, intake/head gasket leaks. Before replacing parts, make sure that #2 cylinder is diagnosed for the misfire. Otherwise you'll be changing out good parts, and spending more
...cylinder head I pulled down an 1996 century 3.1 lite engine to replace the head gaskets and the push rods became mixed up. I know the intakes are shorter then the exhaust. The problem is, how do I ...
...head gasket Verify by doing a compression check and that the pressure remains on each cylinder without a rapid leak rate Check antifreeze reservoir is it low or disappearing into your oil, if so the ...
166 questions posted
Usually answered in minutes!
921 Questions
813 Questions
785 Questions
797 Questions
687 Questions