Question about Buick Park Avenue
...starter clicks but wont start while the interior lights are dim as there is a loss of power and battery dies immediately dash gauges or warning lights? any/either illuminated? Never been a fan of ...
...clicks no sound 2000 Buick Lesabre wont start, no click no sounds. The lights come on inside and out. Replaced the battery no change. Next day car started up but ran ruff. Replaced plug wires and car ...
...starter motor not working. To make sure turn your headlight's on, try to start it, if lights go some what dim to almost off, then have your battery check out first, if light don't dim at all, bad ...
Question about Cars & Trucks
clicks. Do the headlights dim when you turn the key? If so, the battery is flat and needs charging. You may need a new battery if it is 5 years or older. ADDED: The question: ''Do the headlights dim?'
...over. Lights dim a bit, no clicking, only happens every few months or so. Is it battery or selinoid. starter solenoid might be dirty if the lights dim a little it's not the battery.replace the ...
starter solenoid clicks and , the interior lights doesn't change intensity, then you have to troubleshoot the starter. If the interior lights dims then something at starter or engine is jammed. If you
Question about Cars & Trucks
...clicks when I try to start it,new starter,battery why wont it crank over? all the lights work no dimming when I turn the key but the new starter wont crank over? check for starter relay problem as ...
clicks once when turned over, the battery is good and the starter is new all lights work fine turn on the headlights and try to crank the engine; if the lights dim out while you try to crank, then the
...lights would go dim. Again, similar to a faulty starter. Even if the starter itself is bolted to the engine, if the wires going inside the starter aren't connected properly, that could cause the ...
Question about Buick Park Avenue
...starter is not good. Check the voltage of the battery with the lights on, should be 12 volts. If it drops when you try to start then it is faulty. The voltage when running should be 14 volts or
624 questions posted
Usually answered in minutes!
690 Questions
585 Questions
537 Questions
482 Questions
474 Questions