2005 Nissan 350Z "clutch stuck flywheel" Questions

Ad

...clutch seemed to be stuck in-car wouldn't move fast, crawled along, high RPM's and a terrible smell. Parked it, turned it off. Only thing that remained after 5+ hours of sitting was the smell. Ever ...

Ad

...stuck on camaro it wont fall cant seem to get tran to drop in 97 camaeo trying to change clutch all bolts r out lines off pull on it and it moves bout inch from flywheel only to spring back Did you ...

Ad

...clutch plate facings may be 'stuck' to the flywheel and pressure plate surface. To check/clear this problem:- (with the engine not running!) hold clutch pedal down - then from under vehicle, find an ...

Question about Cars & Trucks

1 Answer

...clutch plate is stuck (rusted?) to the flywheel. Check out the linkage from the pedal through to the clutch. There may be grease fittings in hidden places, and the linkage may be seized with rust. ...

Question about Cars & Trucks

1 Answer

...disc to separate from the flywheel allowing the transmission to be stuck in the gear. Could be a lack of fluid in the clutch master cylinder causing problems. Just a few things that you can

...clutch is stuck and not disengaging. Engine off put in gear and rock the vehicle,, with help from a friend press clutch pedal while in gear and have friend push, you will know if the tranny is ok and ...

...it in to be fixed. Has it been sitting for a long time? It will seem stuck if the clutch actuator does nothing. Actuator can be hydraulic or rods and levers. Better info will produce better

clutch, the gear gets stuck in reverse and the car will splutter and shake until stalling on its own. This also happens in gear one and two. what would happen if you put it in first gear,put your foot

...bendix is stuck and not engaging the flywheel. Or the starter gear is engaging the flywheel and the overrunning clutch in the starter is bad. Either way, you are looking at a starter

Question about Cars & Trucks

2 Answers

...stuck clutch. Usually a couple of bumps will loosen it. Make sure you're trying to pull on a part that is strong and that won't be damaged. Hope this helps. Ted Maxwell is right...However "With ...

Not finding what you are looking for?
2005 Nissan 350Z Logo

95 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...