2007 Fiat X1/9 "light fuse" Questions

Ad

main headlight on near side not working when putting the side lights on they work ok, but when you put on the main lights the near side light wont work, tried a new bulb still wont work, tested the ...

Ad

Question about Fiat X1/9

1 Answer

...fuse on the wires to the motor , but you will need to know if power is going to the motors power lines does the heater have a power light on or something to indicate that power is present to the ...

Ad

fiat punto - nearside headlight not working but does when mainbeam is on Switch on lights = nearside main beam is not working Switch on main beam - the nearside headlight comes on but the main beam ...

Question about Fiat X1/9

1 Answer

...light replacement i am driving a fiat palio 1.2 , the break lights on it does not work, what i have done i have check the fuse, it was ok the , check the bulbs they were ok and then change the break ...

new battery ,check alternator it is working ,all fuses are good ,replaced ballast resistor .When I turn on the lights motor will shut down .It also runs the battery down. alternator regulator faulty

Question about Fiat X1/9

1 Answer

centre consol can,t find screw to remove consol Fiat Palio 1.2 , Break lights problem 1. checked the fuse - ok 2. checked the bulbs - ok 3. change the break switch - ok what can be the problem ?

...light s work you might need tio check the grounding of course it is possible damage or try to check the fuse it is located to your front pannel board. and the connect from the main source for the ...

light systems are powered by the same fuse so when your cluster isn't lit up you'll know right away that your tail lights aren't working as it's not safe to drive without tail lights. Your brake, turn

...light, fuse is good, and move to next fuse.

For the fuses inside the car, just clip the tester lead to a good ground point-a metal screw or metal bracket under the dash. Again with key in on, ...

...light fuse, horn fuse), but with key on, all fuses in the fuse panel should have power available to them. Use a test light, clip the ground clip to a metal bracket, and use the test light probe to ...

Not finding what you are looking for?
Cars & Trucks Logo

58 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Fiat Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Any Car Diagnostic...

Level 2 Expert

274 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...