2007 Honda Odyssey "remove inside hatch plastic 2006" Questions

Ad

...remove the brake light assembly to change the brake bulbs. On the the inside of the rear hatch there are plastic vanity covers opposite each tail light. These are snap fit covers. Use a slotted ...

Ad

...remove the Phillips head screw inside. Pillar C (forward) also has a square "air bag" cover plate, but it works differently. Just pry it straight out, but not all the way out. Just let it dangle. At ...

Ad

...Remove Tail Light on a polo hatch 2006 open tailgate on the inside edge of boot open cut out in carpet and loosen plastic wingnut and remove then gently pull taillight from body should only be 1or 2 ...

Question about Honda Odyssey

1 Answer

...inside there will be two plastic clips that go into the side of the tail light, remove the center of the plastic clips, they will pop out, remove the rest of the remaining clip, once you have the ...

...release hatch from inside where you remove a few clips and screws to snake a coat hanger to release latch. That is what I had to do on a 2005, which I assume is same mechanism. Good luck, ...

...happens Latch has probably come off, gotta remove the panel, couple of bolts and plastic clamps holding it on, when you look inside and operate that latch will be visible. Have had it happen 2

Question about Honda Odyssey

2 Answers

...remove lens to replace bulb. Use a small flat head screwdriver to pry off the lens from the plastic housing. The stop light bulb replacement number you need is: 1157 If your talking about taillight ...

...remove the interior trim then get inside the inner tailgate and manually pull up on the release lever. It's hard to say what happened but most of the time I see plastic rod connectors break and the ...

...Inside back hatch, remove the "hand hold" by just prying carefully. The 3/4" little plugs with an 1/8" area in the center-press on the center about 1/4" in and you can remove the entire plug. Just ...

Question about Honda Odyssey

1 Answer

...Inside of those tabs are phillips head screws. Unscrew each of those and any other screws on the panel. Carefully remove the panel and set it aside. You will find behind the plate of metal and ...

Not finding what you are looking for?
2007 Honda Odyssey Logo

526 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...