...turning over and over. They are telling me it is a sway bar end link loose. Its sounds like something is going to come off the bottom of my car. it could be the front stablizer links are worn ...
...front suspension makes a lot of noise when going over small bumps on the road and i mean small undulations. On my previous car the same noise occurred and it ended up being the sway-bar-links. I had ...
Question about Saturn Aura
...bar end links. you can replace them yourself to save a few bucks. first Raise the front of the vehicle with a hydraulic jack. Place jack stands under the frame on each side of the vehicle. Lower the ...
...Bar Bushings Or Tire Rod Ends. Make sure they replaced or checked your sway bars. Front end replacements usually cover ball joints and tie rods. If your sway bars aren't working properly, your ...
...chassis bar that connects lower control arm to frame of vehicle in front end. The bar would be the sway bar. The parts that connect the sway bar to the lower control arm are called the sway bar
...bar, front end shakes at 50mph ,dealer replaced stabaler bar last year, problem back. just wonder if did relace or just adjusted bar' Do a replacement. There is no way to adjust the bar. I doubt they ...
Question about Saturn Aura
...end sway bar bushings? i have a 2000 Dodge Dakota sport with a squeak when I hit a bump, or when I first turn. I believe its my sway bar bushings that are lose....I have no real idea on what the part ...
...end. if you jack up one side and not the other and take the sway bar loose it will be loaded and could cause injury if not careful as long as both front tires are off the ground the sway bar will not ...
Question about Saturn Aura
...end at each hub and two on each U clamp holding the sway bar bushes in place. Sway bars need to flex and bend to do their job so they shouldn't be welded in place. Could you comment below with photos ...
Sway bars are installed by removing your factory end links and sway bar. Re-install the new bushings and position your new sway bar on the vehicle in the OEM location and secure it with the same bolts
434 questions posted
Usually answered in minutes!
151 Questions
120 Questions
27 Questions
12 Questions
13 Questions