2007 Aston Martin V8 Vantage Roadster Convertible "gear stick loose" Questions

...brakes. the rpm when slightly higher to about 1200 to 1300. pls advise check the linkages gear stick to gearbox may be loose. the lever at the gearbox sits in a slot the bolt holding it may be

gear stick couldn't engage first gear, but it engaged third instead. it was also difficult to engage second(although possible). Besides the gear stick has become very loose and wobbly. thanks Could be

...stick gear and is stuck in neutral. what could be the problem What year is your Toyota? By 'stick gear' do you mean a manual gearbox? What exactly does it do when you try to select a gear? Is the ...

Gear stick seems loose when in 5th gear on Toyota Hilux Surf Gear stick seems loose when in 5th gear. Is there an accessible adjustment that can tighten it up? you can replace the bush on the bottom ...

...gear stick became loose, could not find 1st or 2nd gear, had to drive off in 3rd or 4th, cant find reverse and is dificult to find 5th, once in gear van drives well, though the gear stick is loose ...

...sometimes, going into and out of gear. ie you can tap the stick out of third gear with very little effort. I've experienced this on a Volvo and it was the linkage bushings. Stiffened it up

stick shift is loose but not grabbing any gear car turn on, motor rev, check my brake, also emergency brake are off, stick shift move to parking, reverse neutral, and drive but very loose it seems it ...

...gear stick suddenly went completely loose with no gear selection & was stuck in reverse . there was some engagement with left to right movement of the gear stick but up & down its completely ...

...gear stick on Peugeot 206 The gear stick is very loose. It works fine, but when I drive at speed it rattles. I'm just concerned that this will lead to a bigger problem. Any feedback would be ...

...gear stick is completely loose and is hard to tell one gear from another loose bolts at transmission where stick connects to it. You might be able to fix it from the top by removing the expansion ...