2007 Honda Element SC "put rear brakes" Questions

rear of the vehicle. USE SAFETY STANDS. Remove the wheel & tire. Using a C-Clamp (one side on the pad, and the other side on the back of the caliper), compress the caliper pistons in. Remove the 2

...put your foot on the brake, the actuator will not be able to overcome the friction your pull on the shifter causes. It is possible that friction in the selector parts is causing the same thing. With ...

of braking on the rear axle. Is that the case? You might need to put axle stands under the suspension arms at the back and put some load in the van and brake see if there is any difference now. Cheers

...rear rotors,put back together,then then I noticed where brake line hose went into brake caliber was leaking,so that caused the side with new like brake pads not to be gripping disc putting all brake ...

put new brake pads in rear but did not replace drums.after all that i can't get a hard brake pedal. what can i do try adjusting the rear brake shoes but.....spin the rear wheels first is u get the

put them on the rear. This will give you good acceleration but only marginal steering and braking. If you chose the front wheels you'd get good braking, good steering, and good acceleration but if you

Rear Brakes Put all new Brake shoes drums hold down kit on the rear drove for about 20 80 kms when i put the brakes on to stop it makes a thumping noise in the rear the more i drive the worse it gets ...

rear wheels, remove the brake drums, remove the brake shoes and hardware, remove the 4 bolts holding the hubs in. Bolt in the new hubs, reassemble the brake shoes and hard ware, put the brake drums on

...put new brake shoes without replacing adjusting lever on 1994 Hyundia excel rear brake driver side The rear brake drums are drum brakes on the 94 excel. The Excel uses the front brakes the most, so ...

...rear. Just put grease where ever there is metal on metal so the brakes move freely. Keep the grease off the brakes and drum, you can put some grease on the brackets or metal on the brakes but not on ...