2008 Suzuki SX4 "remove panel rear wiper motor" Questions

Ad

Question about Suzuki SX4

1 Answer

panel remove need to remove interior hatch panel to access rear wiper motor this link might help you: http://www.suzuki-forums.com/suzuki-forenza-reno-forum/29364-windshield-wiper-motor.html ...

Ad

...panel. - Remove the rear wiper motor and mounting bracket from the tailgate as a unit. 1 - BEZEL AND GASKET 2 - OUTPUT SHAFT 3 - TAILGATE OUTER PANEL 4 - NUT 5 - NUT COVER What you will need to do is ...

Ad

Question about Suzuki SX4

1 Answer

panel Remove the bezel and gasket from the rear wiper motor output shaft. Remove the trim panel from the tailgate inner panel. Disconnect the tailgate wire harness connector for the flip-up glass ajar

...Remove the rear wiper motor cover trim panel. Disconnect the electrical connector. Remove the 2 rear window wiper motor nuts Remove the rear window wiper motor. Fig. Rear wiper motor view-2008 model ...

...panel. If equipped, remove the lift motor link Remove the upper frame molding Remove assist handle screws Disengage the hidden clips around perimeter of liftgate trim Disconnect the electrical ...

Question about Suzuki SX4

1 Answer

...Remove the liftgate trim panel screw access plug. Remove the screw. Remove the liftgate door trim panel. Use Windshield and Molding/Trim Removal Kit to remove the liftgate door trim panel from the ...

...wiper motor on a 97-05 Montana or Venture Remove screws holding handle and other panel screws and pull on panel (it is held by metal clips) but motor may not be burnt (see help on Montana rear

Question about Suzuki SX4

1 Answer

...panel. Remove the rear wiper module and mounting bracket from the liftgate as a unit. This will help. Thanks please keep updated.please please do rate the solution positively .thank you for using ...

...panel (click for zoom) Rear Window Wiper Motor Fig. : Rear wiper motor assembly and related components Disconnect the negative battery cable. Remove the wiper arm and blade. Remove the liftgate ...

panel. Once inside, removing and replacing the rear wiper motor is easy. You'll start by lifting the cover on the wiper arm retention nut. Remove this nut to get the wiper arm off, then remove the nut

Not finding what you are looking for?
Cars & Trucks Logo

354 questions posted

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...