Question about Buick LaCrosse
i have a 2008 buick lacrosse cx, that seems to be leaking from a plastic tub right above the water pump leading into the block what is this tub called and how can i fix it?t call the parts store
...parts store, sometime helps to have the old one with you. install new one, put on new clamps and tighten firmly, pour in new coolant. check your owners manual to see what kind of coolant Buick ...
Question about Buick LaCrosse
Plastic cover on low beam has become very dull. Want to replace. Buick Lacross 2005 go to junk yard. find part for cheap. replace. or go to dealer. bend over and grab your wallet.pay dearly. wait two ...
Question about Buick LaCrosse
Where is the canister purge valve located on a 2005 Buick LaCrosse CXS with a 3.6 L Remove the plastic cover off top of engine . purge valve solenoid under it. Evaporative Emission (EVAP) Canister ...
plastic strip down between the bright and dim lights and one that is located inside a rubber bumper on the engine side of the light unit. To remove these locking pins, pull or pry up the little tab in
The key to my 05 Lacross does not have metal in the key ring hole and the plastic broke. How do I repair? can I drill a new hole without damaging the chip? Hi, the only part that dont have the circuit
...plastic cover that goes over the fitting you will see a metal clip in a groove. You can use a small pick to carefully remove the clip (they go flyin and get lost easily but they are available from ...
...parts store. Be careful not to touch the glass with your fingers. That will cause its early demise. The old lamp is accessible from inside the hood, but it's in a rather tight place. It has a bayonet ...
...9) To replace the headlight bulb you need to remove the front bumper cover. 10)To release the plastic bumper assembly to give you a little more space. This is done by removing two expansion ...
...plastic parts often break when being pulled out so check if the store has a 'Help' display with specialized parts for just such an event. You will find a precut plastic film once the panel is removed ...
189 questions posted
Usually answered in minutes!
544 Questions
374 Questions
150 Questions
51 Questions
31 Questions