2008 Mitsubishi Lancer GTS CVT Sedan "replace transmission belt" Questions

transmission). Loosen up the fan belt pulley and have them removed. You should have access to the cover for you to get the timing belt out by loosening the tensor. Inspect the other parts or have them

belt broke while i was driving, i replaced it and the engine is not starting. what might be the problem (2002 mitsubishi lancer. automatic transmission) more information required does it turn over etc

...belt, or the cv axels. drive in a tight circle each direction and listen for for a clicking sound. if you hear one then your cv axels need to be replaced Check the transmission oil level. That ...

...transmission Car was in an accident Airbag defective/unplugged SRS stands for "SUPPLEMENTAL RESTRAINT SYSTEM" THAT SYSTEM IS THE AIRBAG, THE PROBLEM IS ALMOST CERTAINLY THE COILED AIRBAG CONNECTOR ...

...belt won't have any effect on the transmission. It will effect the ability of the engine to function properly if you happened to put the belt on wrong. Check the diagram below and double check ...

...replace a transmission on 2004 Kia Amanti? Would it be cost effective AT the time of replacing transmission to ALSO replace. Additional Services: (What is this?) Add Drive Belt(s) Add Front Engine ...

belt broke Check the color of the transmission fluid, dark colored is bad. Overheating could cause the transmission fluid to go bad. Most transmission fluids are red and semi transparent. If the fluid

transmission? Either way, if you replaced the alternator belt and the battery light went away and the car doesn't sputter or stop, then it's the "speed sensor" on the transmission itself. The car will

...belt and all other belts. 2 days after it getting fixed by a mechanic, the transmission went out. I'm assuming it was the transmission-it started making a grinding noise when I'd put it in drive and ...

...transmission. (1)Where is bolt to drain engine block coolant?(2)After removing front engine mounting bracket bolts, engine does not lower enough to make room to remove belt. Do i have to remove also ...