2007 Pontiac Grand Prix GXP Sedan "stuck high beam switch" Questions

beams will not turn on. Try clicking on high beam switch forwards & backwards is stuck or broken in high beam mode. If not able to free up by working forwards & backwards. Will need to replace

...high beams. If there is no change, pull the relay out again and interrogate the relay socket with a 12 volt test light or voltmeter. Connect your test light clip to chassis ground and probe the relay ...

...high beams stuck on A few weeks ago I clicked the turn signal stalk on my 2002 Lincoln LS to switch to high beams. The high beams came on but I couldn't switch back to low beams. The high beam blue ...

stuck on high beam. When I turn on my headlights, they come on at high beam and I can't figure out how to switch them to low beam. Is switch in the steering colum? pull on the signal lever toward you

high beams are stuck on an day time lights run the high beams are stuck on. but the day time lights run properly but at night the high beams are on and will not cut off and the switch does ingauge but

...I turn high beams into "on" position. I believe it's the dimmer switch but not sure. you'd have to play with it and see if it's related to maybe a stuck fog light or simply the high beam switch is ...

stuck on high beams on 2004 Ford Expedition, dimmer switch not working The dimmer switch does not disengage the high beams. How do I get my High beams to turn off when the switch/lever is not working?

...high beams work, low beams do not ( brand new bulbs and interior switch ) Passenger reverse lamp inop... Driver side rear blinker/brake light stuck on... Fuse panel hard to read but all good fuses. ...

High beams are stuck on.. won't switch to low beams maybe your wire instalation is wrong check the relays in the relay box near the battery.the high beam relay is stucked.try anew one.pull it out and ...

under the dash bolted to the steering column. Go to rockauto.com and it'll be under your vehicle under electrical switches. The switch heats up and gets stuck in high or low. Common problem. Good luck