2007 Pontiac G5 Gt Coupe "flywheel seal replacement" Questions

Ad

...Was able to get it home but now it will not go into any gear. Any ideas?? tipicaly have the flywheel turned or replaced. Replace clutch, pressure plate, and throw out bearing. and you should ...

Ad

...rear oil seal cant figure it out any tips Remove transmission,remove flywheel.Seal is a one piece seal,external.Pry out old one ,lube inner surface of seal and re-install.Replace flywheel and

Ad

...seal, after dropping the transmission and after putting it back in, the flywheel gets locked up and won't move make sure the flywheel is not on backwards, arter that is clear be sure to ...

...flywheel. Main seal will be accessible If it's manual gear box, you need to remove gearbox, manual or automatic. If manual remove flywheel, then you will see the seal, you can then remove the seal, ...

...FLYWHEEL REMOVE OIL PAN. REMOVE REAR OIL SEAL HOUSING BOLTS. USING THE PRY POINT LOCATED AT THE EDGE OF THE CRANKSHAFT REAR MAIN SEAL HOUSING SHEAR THE RTV SEALANT. REMOVE THE REAR MAIN OIL SEAL. ...

...a 94 chevy silverado and my flywheel spins and the motor dont? only way flywheel will spin by itself is if bolts sheared off or crankshaft broke at rear seal replace the flywheel, the center has ...

Question about Pontiac G5

1 Answer

...flywheel and engine rear cover plate. Use an awl to punch two holes in the crankshaft rear oil seal. Punch the holes on opposite sides of the crankshaft and just above the bearing cap to cylinder ...

Question about Pontiac G5

1 Answer

...the harmonic balancer. pry the seal out and replace it using a hammer. be nice to it. The rear seal, pull the transmission. pull the flywheel. remove the seal and be nice to it putting it back

Question about Pontiac G5

1 Answer

...you can do by removing the lower balancer replacing the seal the rear you have to pull the transmissionand flywheel to get to that seal but the one piece you may have to remove part of the oil ...

Question about Cars & Trucks

1 Answer

...flywheel machined . While the gear box is out replace the rear main seal and the clutch shaft input seal ( the seal is behind the metal tube that the throw out bearing is on so it is a simple seal to ...

Not finding what you are looking for?
2007 Pontiac G5 Gt Coupe Logo

340 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...