...bulb as the brake light. If so, it's up to the flasher assy to direct the lights to both come on, and/or for one to flash if the brake and turn signal is on, e.g.. There could also be a backup light. ...
...brake light and turn signal dose not work. I have replaced the bulb and I have looked at the 5 to 15 amp fuses located by the front passenger seat. Looking in the owners manual #3, 15 amp brake lamp ...
brake lights and left turn signal are out check fuses then check bulbs good luck
...bulb in 05 Mercury mariner Do you get to it from the inside or the outside. Driver side, rear brake light inside looks sealed? two screws on the inside and lightly tug the the assembley off the ...
...TURN SIGNAL IS VERY RAPID ON THE DASHBOARD. NO LIGHT ON THE REAR HEADLIGHT OF ANY KIND SIGNAL OR BRAKE. THANKS Hi. The flasher goes faster because the lights are not working. Once you find the ...
...brake light. Then the blinker started to blink fast and I believe the taillight might be out. I heard that this might be the cause of a taillight about to burn out. it is prob either a front or rear ...
brake bulb for my 2007 mercury mariner? I have already removed the 2 screws on the inside section of the rear tail light lens, but something is keeping it connected on the outside of the lens. Are you
...brake bulb which was bad but still no brake light when pushing brake on driver side sounds like you have a short in the drivers side brake light. it may be due to corrosion in the bulb inlet.try ...
filaments inside the bulbs illuminate also 3rd brake bulb illuminates. 3 If you turn the headlights of no bulbs are ON. If you press the brake pedal all 3 bulbs will illuminate with the same intensity
...bulb the brake light or is the bottom bulb Here's a link to the brake light bulb,check your bulb and match the number up on your blown ...
75 questions posted
Usually answered in minutes!
152 Questions
175 Questions
156 Questions
35 Questions
20 Questions