Rear brake lights are not working all fuses check out ok, replaced bulbs already check your brake switch. should be located under the steering wheel on the brake pedal. The only thing left is the ...
...is on a 2007 suzuki XL7 The lower lights are on a separate fuse by law, that is why the hi mount works. Check for wiring issues to the rear brake lights wiring harness, buy a factory wiring
a grinding noise in driver side rear at 40 mph 2003xl7 I believe this has drums on the rear. Do this test: Go 40, then listen for any change in grinding when you put on the brakes lightly then harder
...what else to do. Also not stopping well after replacing everything. Buy quality pads & check rear brakes make sure they are ...
brake lights on rear don't work on either side but the central light on hatch window does work both lamps burned out. the center is wired to the same circuit so shows you the cars brake switch works ...
Question about Suzuki XL7
...grinding noise - drivers side only? Where is the noise? Front or back? At the brake or differential? Usually grinding and clicking is the rear brake drums. Brake shoes/hardware. Year, make, and
How do you remove hub to change bearings on rear rear of what, axle? hub, do you mean mean the brake drum or the axle flange.
rear brake lights are working properly. that yellow plastic part sounds like the safety system that prevents you from shifting out of park or neutral unless the brakes are pressed. it is an electrical
...rear piston clearance is not set the MC will LOCK THE WHOLE SYSTEM up. or 1 end. if the brake didnt release above, that means (gee simple) the brake neat is locked. (bad bearing or wet soaked brakes ...
rear end is making a clunking noise, in gear or out of gear location, need to find where in the rear end. left axles, right, center all this takes hands on work, must be try to guess and waste your ...
739 questions posted
Usually answered in minutes!
417 Questions
131 Questions
103 Questions
121 Questions
44 Questions