2007 Porsche 911 Turbo Coupe "bendix starter coming" Questions

Ad

Question about Porsche 911

1 Answer

...bendix inside the starter motor is not engaging.It is not really a user servisable part but can be replaced for not too much money. Unfortunatly the starter motor has to come out for the repair to be ...

Ad

Question about Porsche 911

1 Answer

...is spring loaded and mounted in the nose of your starter. 2 options - pull starter, disassemble & install bendix or Just replace starter as an assembly (new starter comes w/new starter

Ad

...starter works, bendix and all, but most of the time it just spins and won't engage with the flexplate to start the engine. If I turn the crankshaft by hand a few times it will usually start right up. ...

...bendix is sticking on the starter you can try taking the starter off and using a lube on the bendix and gear, but don't spray it inside the starter. I would also check the connections before assuming ...

...end of a starter), a solenoid not fully engaging a bendix, a weak battery and finally a damaged ring gear or flex plate. Without specific info on the vehicle, these are the choices that come to

...starter Bendix and flywheel the originals shims may not work. Inspect the flywheel to make sure it is in good shape. Usually the Bendix on the starter will wear out first if a slight misalignment is ...

...pinion arrangement was phased into use beginning in the early 1960s; before that time, a Bendix drive was used. http://en.wikipedia.org/wiki/Starter_%28engine%29 welcome to 2008

...bendix in my starter in my 1984 ford club wagon is going out how do i fix it??? first take off the starter look to see if the bendix is sticking it should turn out freely by hand if not wash it off ...

Question about Porsche 911

1 Answer

...starter will spin until the bendix comes all the way out. Thats the way most are wired. you sure the flywheel is good. you sure the wires are on correctly? why did you replace it in the first

...starter bendix can extend and then not retract. This can cause problems in clearing the flywheel. If you disconnect the battery terminal, take a large socket on the front crankshaft bolt and move the ...

Not finding what you are looking for?
2007 Porsche 911 Turbo Coupe Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Porsche 911
2002 Porsche 911

94 Questions

2004 Porsche 911
2004 Porsche 911

37 Questions

1991 Porsche 911
1991 Porsche 911

28 Questions

1995 Porsche 911
1995 Porsche 911

26 Questions

2005 Porsche 911
2005 Porsche 911

25 Questions

Top Porsche Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...