2002 Chrysler Concorde LXi "concord brake light switch" Questions

2004 concorde brake lights not working Brake lights not working I would check for voltage at the fuse and the brake light switch.The power goes from the brake switch thru the turn signal switch.

...concord brake lights stay on 2003 Chrysler Concord. The brake lights stay on even when the vehicle is off. Where is the switch located. the brake light switch is located on the lever that the brake ...

...brake light switch are all good. Is it possible the multifunction switch is defective? check light bulb socket for negative and positive we brake pedal press on look closer at that lite ground & ...

...Concord no brake lights. Found the fuse box but need to know if there is possibly a fusible link or just the brake controller and what else? No fusible link will be found on the brake light wires. ...

Brake Lights on my 2000 chrysler concorde Wont turn off after amp install you probably bumbed your brake light switch by your brake pedal. i instal amps. it happens

...or disconnected. What all this means is the arm is not coming back up to where it used to and is not contacting the brake light switch. Look up under there and re-adjust the switch, or the

...come on. Every other light on the car works. Checked bulbs and fuses but they are fine. I have a 2002 Chrysler Concorde. What could be the problem? could be the brake light switch or a ground

where is the brake light switch located on a 1998 concorde? it is directly above the brake petal, with a harness with 3 wires.

brake light wiring diagram 1972 Gremlin Hi I need a brake light wiring diagram for a AMC 1972 Gremlin I have a 72 amx, the two wire conector at the brake light switch down on the brake pedal is light ...

No brake lights - good bulbs, good fuse, Flashers work ,Turn signals work, Brake switch allows me to put the car in gear from park. renew the brake light switch it has two circuits inside it