work properly. Repeat the process for each tire and brake line on your car. Bleed the brakes as necessary after replacing the brake lines and make sure you have plenty of brake fluid in your reservoir
Question about Ford Explorer
I replaced the front brake pads and installed new rotors and it still grinds when I step on the brakes. I replaced the front brake pads and installed new rotors, but it still grinds when I apply on ...
back lights won't turn off brake lights will not shut off when car is turned off Sounds like the electrical brake light switch is in need of replacement,it is located just above the brake pedal ...
ford 2002 explorer brake lights The brake lights on my ford explorer won't go on when the brake is depressed. I've replaced the brake switch. Replace the bubs and/or check the wiring connections with ...
I want to try to replace the brake light switch for my 02 Ford Explorer XLT. Can I do it myself with relative ease and can someone, step by step, walk me through it. Thanks! YOU CAN REPLACE BRAKE ...
Question about Ford Explorer
not sure of sequence of steps to replace brake switch. faulty swithch has been taken out. how do I replace the brake light switch assembly: step by step Brake lights not working.Change bulbs and check
rear brake rotor replacment 2000 ford explorer rear brake rotor replacment 206-04: Rear Disc Brake 2000 Explorer/Mountaineer Workshop Manual REMOVAL AND INSTALLATION Disc Removal NOTE: When removing ...
How often should the rear brake pads and front brakes be change on a 2003 ford explorer. Hi!! It depends on your driving habits and how much you drive the vehicle. All brake pads, have a metal tab ...
Question about Ford Explorer
...brakes. I ended up replacing the Master Cylinder to fix the problem. Just make sure you bleed the system real good. I could be your brake booster which provides the power assist in your braking. The ...
back brake light not working The brake light switch is probably the problem,at about 25.00$ .for proof remove the plug from the switch on the brake lever and put a small cotter pin across the two ...
335 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions