...ball joints, arms, etc. have the play in the steering checked !!!!!!! it can be adjusted but if overadjusted it will turn lock to lock by it self......... Sounds like the steering box needs to be ...
...tolerance up and down on ball joints? I have slight play on both sides up and down. I have never known any vehicle to have any play in ball joints. Should I assume the same for this truck? Try ...
...far out, the right side toe was out a little but still within tolerable limits. I know I need new ball joints and tie rods ends, but I need some assistance on which parts to replace to correct
...far out, the right side toe was out a little but still within tolerable limits. I know I need new ball joints and tie rods ends, but I need some assistance on which parts to replace to correct
tolerance is measured in .000 of an inch. So if there is any significant movement, the hub bearing has failed. Another good part to check are your ball joints. If the hub isn't your problem, drop me a
Question about Saturn Cars & Trucks
tolerance, brake pads shot, etc.? What is the condition of the wheel bearings? Do you experience any "chatter" or slop in the front end when braking or driving? Jack the front end off the ground. Grab
...ball joints and track rod inner and outer ends for free play, suspension joint condition and shock absorbers for security, leaks and effectiveness. Check the tyres for bulges, etc. and wheels for ...
Question about Ford E-350 Super Duty
ball joint or tie rod end. Could not be balance if rotating did not help. 150,000 miles, your going to catch up with my 1996 jimmy at 425,000 miles and still going up. The chipping in the front end is
...Chevy G20 dayvan that is eating front tyres all the time. The usual have been checked i.e tracking, ball joints and suspension etc. Being in England means that not many people want to work on it and ...
234 questions posted
Usually answered in minutes!
3,749 Questions
2,998 Questions
2,612 Questions
2,348 Questions
2,636 Questions