2007 Mazda MX6 "flashing hold light" Questions

HOLD light flashing and shifting hard . cheaked trans fluid , level was low but toped up and still shifts hard and hold light flashing try diconnecting switch to test switch . Scan Pcm for trans codes

...mazda mx6. hold light keeps flashing. wont go out of first. whats wrong with it? If its flashing than it means a transmission code,I believe its a overheating code for a solenoid in the

i have a mazda mx6 automatic with the hold light flashing transmission won't shift into third gear dun push the hold button on the side of the shifter

...last gear bought a 1993 Mazda mx6 and the car does not go into the last gear it rev at 4500 rpm and wont change gears Sounds like something is wrong with your overdrive, is your hold light

my ms8 hold light for transmission keeps flashing and now the car does not drive at all i put a new filter and auto transmission fluid in The torque converter clutch is shot. It's an expensive repair.

hold light started flashing again & the trans started slipping again. I stressed over it for a day or 2 & then I took it out for a drive & thrashed it, Low & behold it came right. When

...hold light began flashing then the car died. It will still crank but does so fast. It will not start. The timing belt has broken. Fortunately though, according to my catalog, this is not an ...

Hold them until the indicator light flashes (20 seconds or longer). 2.) Now hold your garage door remote close to the Audi remote. 3.) Simultaneously press and hold both your garage door remote button

...hold light flashing is just like a check engine light but for the transmission. If your hold light is flashing it sounds like a selanoid went bad and your clutchs inside your transmission is coming ...

flashing "Hold" light in a 2001 Ford Laser automatic transmission indicates a potential issue with the transmission. It's a warning sign that there may be a problem that needs attention. Here are some