2008 Dodge Ram 1500 2WD "replace bottom ball joints 1997" Questions

Ad

...replace ball joints on 1997 dodge ram 1500 jack up truck support truck remove brake caliper and support the caliper dont let it hang by the hose remove cotter pin from bottom of ball joint remove ...

Ad

...hours, and a case of beer. Have a Look at this Video You-Tube video "0dRRXKDRDxc" placeholder (do not delete) there is a bolt on top and on the bottom but you have to compress the ball join it

Ad

Question about Dodge Ram 1500

2 Answers

...bottom cuts in. The outside 6inches wears on the tire, while the inside tread does not wear at all.) I was told something about it being the inner tie rod was worn. But from my knowledge, that would ...

end squeaks when driving over bumpy roads mostly when turning left. I installed all new top and bottom ball joints and both front shocks and still makes loud squeaking. Spring shackle bushings. Really

Question about Dodge Ram 1500

1 Answer

...replace u joints do u have to drop tne bottom ball joints Jeep actual made this pretty easy to do. Remove the caliper and rotor. Remove the axle nut. Remove the three bolts that secure the wheel ...

...bottom of axle bootthen loosen more and use bar to push down, repeat until the nut is off and the balljoint should slide down and out of control arm with a little elbow grease. Slap the new BJ in and ...

Question about Dodge Ram 1500

2 Answers

...front turn wheels by hand on full lock , , new cv require  wheel off  top and bottom swivvels removed . lever out total assembly , replace cv joint ,   more info  come back

ball joints just replaced, inner and outer tie rod ends on drivers and passenger side replaced but when going in reverse , wheels are toeing out and when going forward wheels (both ) are toeing inward

Question about Dodge Ram 1500

3 Answers

...ball joints for excessive play. Jack up the front on either side and have a helper push and pull on the top or bottom of the tire. Watch the area where the hub pivots on the axle. if both sides check ...

...replaced than there will not be any grease zerks. If the outer tie rods have been replaces the zerks will be on top. If the ball joints have been replaced the zerk will be on the side or the

Not finding what you are looking for?
Cars & Trucks Logo

163 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...