...39;t compress further. You don't have to over-do it. Don't force it and don't do this with the back brakes...they require a tool that rotates the piston as it compresses... Hint: rent it ...
...39;t simply compress like many calipers using a C-clamp. You need to turn them in like a screw. Like I said use a big flat blade screwdriver on one of the sides where there is a notch ...
...compress then the caliper is seized and needs to be replaced. When you have finished the job, don't forget to bleed the brakes at this caliper. Good luck with this. The rear calipers must be turn ...
...39;t slide like the upper one. I have never seen this before is this normal? YOU NEED TO COMPRESS THE CALIPER PISTON USING SPECIAL TOOL 09580 - 3400 OR YOU CAN USE A LARGE C CLAMP AND THE OLD BRAKE ...
compress the piston back into the caliper be sure the brake fluid resevoir doesn't overflow when the fluid returns during the compression process. Remove brake fluid reservoir cap. Fold full paper
...compress piston with a C clamp on my pontiac g6 rear brakes Certain piston is a spinning type. Look for fancy notch / cut-out / making on the piston. You will need a caliper tool or needle noise to ...
...39;t compress piston, tried C-clamp Open the bleeder to compress caliper pistonIf you use a c-clamp, you will ruin the parking brake in caliperThe piston gets turned or screwed in with the ...
...39;t compress for me to put on new pads if your turning the piston the right way which you probably are so it turns in not out and it won`t go back then it sounds like caliper needs to be replaced as ...
...39;t compress the piston into the caliper- any ideas? 2003 rendezvous FIRST REMOVE SMALL AMOUNT OF BRAKE FLUID FROM THE BRAKE MASTERCYLINDER. THEN USE A LARGE C - CLAMP AND LEAVE THE OLD BRAKE PAD IN ...
...39;t compress back in. Try pushing in and rotating the piston clockwise at the same time. There should be slots or grooves on the face of the piston for this. You can use a C clamp and pliers if you ...
1,151 questions posted
Usually answered in minutes!
1,073 Questions
901 Questions
905 Questions
722 Questions
711 Questions
