2008 Dodge Caliber "10 rusted brake" Questions

Ad

Question about Dodge Caliber

1 Answer

...10 mph. do you think this could be the catalytic converter? No, my guess is your experiencing a little rust on brake rotors, or something similar. What happens when you do it with slight pressure on ...

Ad

...10 minutes then smooth it out. Once I get off the highway it is fine until i get back on the highway. I have check each tires and noticed that the front passenger side is hot to the touch. I noticed ...

Ad

Question about Dodge Caliber

2 Answers

...10 feet of 1/4 in. brake line that will go front to back working on 94 chev sieera ,it had no brake lights , had signal lights n park lights ,cross a wire on brake switch now truck will not go.had to ...

...10 years old & not changed,rusted parking brake cables We need something to go on to suggest something I will tell you that I have never had an issue in 49 years of doing brakes & I believe ...

...10 set up for 2-3 years because of bad transmission I replaced it and now abs and brake lights are on there was nothing wrong with brakes before it set up how can I turn lights off now the tone rings ...

Question about Dodge Caliber

1 Answer

...wondering what i may have broke with this maneuver before disassembling entire brake assembly in 10 degree weather and snow... You have a rusted e-brake cable that's not releasing after

...brake fluid has NOT been changed on any vehicle every 2 years since it was new, you can be assured that after 10 years ,the inside of the calipers are all rust Replace the calipers & the rubber ...

...rusted through. Could also be a rear brake cylinder has failed, leaking out your brake fluid, and causing the brakes to give out when you needed them most. Routine inspection probably would not have ...

rusted break line about 10 in broken break line on dr front over tire NO Have to fabricate a 3/16" brake tubing line &double flair the endsYou don't do 10",you go back to the last fitting

Question about Dodge Caliber

1 Answer

...slowing down. only happens to full stop at 10 miles perhour there is more than likely a piece of rust stuck to one of the front abs wheel speed sensors. this happens during brake service

Not finding what you are looking for?
Cars & Trucks Logo

555 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...