2008 Dodge Avenger "programing remote door locks" Questions

Ad

Question about Dodge Avenger

3 Answers

My 2008 Dodge Avenger's battery is dead, I have jumped it 4 to 5 times. The car keeps running after removing the jumper cables and the battery charges up enough to restart it a couple of hour later. ...

Ad

...remote transmitter into the electronic door lock control processor, perform the following steps: Turn ignition switch to the RUN position and momentarily short the two terminals of the program ...

Ad

Question about Dodge Avenger

1 Answer

...door locks do not respond for any remote transmitter, wait several seconds and press the button again. If the door locks still fail to respond, refer to Locks, Latches and Entry Systems ? Late Build ...

...remote door locks should cycle again to confirm that it programed.Then when finished turn off the ignition switch and door locks should unlock to confirm you have exited programming mode. . Turn ...

Question about Dodge Avenger

1 Answer

...Remote Keyless Entry Door Locks Operation The remote entry feature allows the customer to unlock the driver door, unlock all doors, and lock all doors using a valid remote transmitter as long as the ...

...door locks inop, new battery installed in remote, all fuses good, still inop? 1. Locate the red two wired programming connector located near the central locking control module that is located behind ...

...remote transmitter). If the door locks still fail to respond, go to Pinpoint Test A. 3. Repeat Step 2 to program additional keyless entry remote transmitters into the remote keyless entry module (up ...

Question about Dodge Avenger

2 Answers

...programing again.does anybody knows how can i program this remote again.thank you very much. 1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks ...

Question about Dodge Avenger

1 Answer

...remote transmitter. first leave driver door open all other doors closed,key removed from the ignition switch. insert key into the ignition switch,then remove it.press lock and unlock on the vechicle ...

how to program a keyless remote on a 2003 f-150 To program the transmitters yourself: Insert a key in the ignition and turn from 3(Off) to 4(On) eight times in rapid succession (within 10 seconds) ...

Not finding what you are looking for?
Cars & Trucks Logo

1,612 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...