Question about Chevrolet Equinox
...remove it for replacement If your clogged you can use a sewing needle to clean out. If it's broken you may need to go under hood and use a pair of pliers to pinch the underside of the washer nozzle. ...
...broken or just needs lube.Remove the speedometer cable, locate the connection at the transmission and unscrew it, then locate the connection at the rear of the speedometer, remove the cable from the ...
...remove the single screw on top of the cluster and the two that are underneath. Fourth release the tabs that hold the bezel around your cluster. Fifth each lens can then be removed exposing the gauge ...
Question about Cadillac Cars & Trucks
lay it on a flat surface to provide better access to the broken drain plug, then you can work at it to remove it. It might come out easy with a pair of needle nose pliers. You may have to drill it out
...remove broken gas cap Top of gas cap is broken off while the rest of the gas cap is stuck inside car Use a flat head or slotted screw driver and a hammer tap on a loosening rotation Use a pair of ...
Question about Chevrolet Equinox
...broken off at top. How do I get it out? A pair of needle nose pliers can be used to retreive it if its not too far down the tube. If you cant see it use a telescoping magnet slide it slowly into the ...
Question about Chevrolet Equinox
wrong key broke off in ignition of a 2004 focus how do i removed this piece Might have to have the barrel drilled out and replaced, I have removed broken keys with very fine crochet needles and a lot ...
...broken plastic dipstick which i can,t remove if i pushed it down into the sump to make room for a new one ,will the old dipstick do any damage ? Do Not do that!! Anything foreign in the sump is a ...
Question about Cars & Trucks
remove a broken light buld that is stuck in the socket? How do I remove a broken light bulb that is stuck in the socket. I forgot if the switch is off or on? Use needle nose pliers Go inside the bulb
disconnecting the negative battery terminal. Then use something like a needle nose pliers or tweezers to remove the broken fuse. Replace with new fuse with correct amperage. Reconnect battery terminal
714 questions posted
Usually answered in minutes!
1,876 Questions
446 Questions
159 Questions
127 Questions
73 Questions