2008 Chevrolet Cobalt "replace engine" Questions

...just briefly (a second or two). Have someone look to see if the belts move. Generally an engine replacement involves replacing the engine as a "Long Block" which is everything except the external ...

...replace check engine lite is on Engine light, take it to an auto parts store & have it scanned for codes. Timing belt about every 30,000 mi. How, put a floor jack under the engine, take off front ...

engine shakes replaced o2 sensor and map sensor still shakes what could it be replaced o2 sensor, map sensor what does it need Is the Check Engine light on?

...Replace if necessary. Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary. Verify proper intake air temperature (IAT) sensor operation, replace if necessary. If the ...

...button - Coolant says - - - F Engine fan comes on immediately If coolant level is hull replace sencer in radiater over flow tank. can have check engine light checked free at Auto Zone...Thank

...Engine Power, MIL/SES Light, DTC P1516, P2135, P2138 (Replace PCM) Models:2005-2006 Chevrolet Cobalt, Cobalt SS, Malibu 2006 Chevrolet Colorado, TrailBlazer 2006 GMC Canyon, Envoy 2006 HUMMER H3 ...

...incorect timing.have u changed cam belt recently? sometimes you just need a solenoid replaced. an engine flush and solenoid replacement solved mine throwing the same codes and running ...

...plugs in on the drivers side of the engine. We used to have the car do this all the time, until we replaced that module, I have since put 30 K on the car, and it now runs fine. It did cost a few ...

...isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM or ECM,ECU), which is ...

...replace the MAP sensor. Component Testing NOTE You must perform the circuit/system testing, in order to verify the integrity of the MAP sensor circuits, before proceeding with the component testing. ...