2008 Chevrolet Cobalt "replace crankshaft sensor" Questions

...car is running it starts even same with crank sensor unplugged P0336 means Crankshaft Position Sensor A Circuit Range/Performance. Try replacing the crank sensor next. ...

could it be water problem around the crankshaft regulator?. Code "P0336" is the code for a crankshaft position sensor (CPS) fault. The connection may just be loose but it probably needs to be replaced

...crankshaft/exhaust cam sensor misalignment. I replaced the sensors and I know the timing chain is not broken. I replaced the exhaust cam actuator solenoid. Car has spark and I hear the fuel pump and ...

...start in the morning wait for awile then it starts. Dealership can't find anything wrong, starts every time for them so they say. Have the crankshaft sensor replaced,this is more common t o go

After replacing the crankshaft position sensor of a 2007 2.2 ltr Cobalt,do I have to reprogram the PCM? yes to erace engine check light

...you don't have to replace all of them to make sure you get the right one. I got same issues with mine an 07 2.4 changed crankshaft and camshaft sensors same thing it still jerking a bit between ...

...Sensor - Faulty Crankshaft Position (CKP) Sensor P0014-Camshaft Position 'B' Timing Over-Advanced or System PerformancePossible causes - Dirty Oil - Low engine oil level - Faulty Exhaust Camshaft ...

...SENSOR. BUT HAVE VECHICLE CODE SCAN. YOUR VECHICLE TIME FOR TRANSMISSION FLUID CHANGE IF FLUID IS LOW. YOUR VECHICLE HAS A CHECK PLUG ON TRANSMISSION  ADJACENT  TO OIL PAN DRAIN PLUG. ...

...Replace Camshaft position sensor and Crankshaft Position Sensor? http://technoanswers.blogspot.in/2012/06/2005-dodge-durango-replace-camshaft.html ---------- GMC Crankshaft Position (CKP) ...

...replace the crankshaft position sensor remove heat shield disconnect the electrical connector the remove sensor retaining bolt then remove crankshaft sensor.after replacing crankshaft sensor you need ...