Question about Cars & Trucks
...opposite way from the wheel and then becomes so tight that it is unmanageble. When the steering box cools down it becomes slightly looser to steer but still not like it is normally. I have had to ...
tight ? Try turning the belt where the ridges are the opposite way. You will have to remove the belt. you have fitted timing belt wrong way arond the the tensioner hi are you sure you have the correct
...pan. What are the torque Specs? 15 to 18 foot pounds Just start at one point and go across to the opposite side for the second. The tighten one on the side then go across to the other side. Criss ...
...opposite end at the same time but not all the way tight.....leave it loose until all bolts are in place and hand tight snug. ...It only takes about 9 or 12 pounds torque which means not very ...
...Check the battery cable connections at the opposite ends of the cables. The positive cable connects to the starter and the negative connects to the engine block. Make sure all connections are
blower motor. Should be located under hood, passenger side behind strut tower on firewall. Little tight to get in there, remove 2 screws and slide it hard to one side and pull out at opposite end hard
Question about Toyota Cars & Trucks
opposite ?? Please help can't get the bolt loose words to help you remembers sequences right is tightly left is loosely put socket wrench with extension tap it with hammer lightly when it tight socket
Question about Chevrolet Silverado 1500
What are the torque specs for a 2002 ford ranger transmission pan? im not sure but hand tight will work an tighten each bolt on the opposite side of pan like you would a cyc head
...Opposite side of the throttle body from the throttle cable. As the throttle cable pulls the throttle open it moves the sensor. It should be rather tight to the firewall and sometimes hard to
464 questions posted
Usually answered in minutes!
4,236 Questions
159 Questions
130 Questions
67 Questions
56 Questions
