2008 Nissan Versa "remove tail light assembly 2007" Questions

Ad

...behind the tail light area on the inside panel. Remove these covers and the nut (8mm) behind them to access the light assembly. Pull lightly on the light assembly to remove, then replace the

Ad

...tail light and cannot remove the assembly. Any pictures would be great. You have to rip it out after removing the two 10 mm nuts, the catch at the front was not designed to let go until you bang it ...

Ad

tail light assembly of to change the brake light bulb on nisson versa hatchback open the rear hatch and pull carpet away from the lens you want out,you will see four plastic thumb nuts,remove them and

Question about Nissan Versa

1 Answer

tail light in the trunk. inside there are 2 bolts,one at the top and one near the bottom..Use a 10mm long socket,1/4 inch, with about an 6 inch extention on it.One of the bolts ( top, is off center) I

Question about Nissan Versa

1 Answer

...tail light assembly, are two plastic cover plates. Remove these with a flat tool (screwdriver will work) by prying in the small ****. They pop off. Inside one you will see a nut. This is a 10mm deep ...

...tail light assembly or can you just get to the screws to remove the assembly itself. Yes, you have to remove the plastic panel. It is mostly held by spring clips. You can see how to remove it at the ...

...remove the tail light assembly from my Lincoln MKX. I have removed the two screws but can't get the assembly out. i have removed the two screws but cant get tail light assembly out, how do you remove ...

Question about Nissan Versa

1 Answer

the rear light bulb. I removed the plastic hex nut but don't know what to do from there. Pull the tail light assembly out. Owner manual has instruction on how to remove tail light for bulb replacement

Question about Nissan Versa

1 Answer

...tail light bulb in a 2007 Tahoe 1. Open the liftgate. 2. Remove the two screws from the taillamp assembly. 3. Pull the taillamp assembly rearward until you disengage the inner pins on the taillamp ...

...remove two nuts which secure the tail light in place. Once the two nuts are removed you can start pulling the whole tail light assembly out. There are two other tabs that secure the tail light in ...

Not finding what you are looking for?
Cars & Trucks Logo

254 questions posted

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...