Noisy Idler or tensioner pulley grinding noise from the idler or belt tensioner. bearings are going out. replace pulley.
...engine makes a whinning noise. It is worse when it is cold. I think maybe a belt but maybe the idler pulley? or the power steering pump If it gets worse when turning the wheel at a stop, then ...
how to replace the idler pulley on a 2000 Chrysler Town and Country? Loosen the drive belt Unbolt the pulley
...is off at the tentor pully It very well could be the tensioner if it does not sit straight, or the idler pulley if the bearings have gone out, but usually 99% of the time it is the power steering ...
...what causes the problem. Make sure that you have identified the tensioner pulley as apposed to the idler pulley. With the 15mm socket on the tensioner pulley's bolt, rotate it clockwise and this ...
...kit. Any belt you try to put on will not work duse to the routing. The kit comes with a bracket an idler pulley and a new belt with all nessessary hardware to install they run about ...
...hard to turn it must be replaced. While you've got the belt loose turn the remainig pulleys and wiggle them to check for play. Change any idler or tensioner pulley that makes any noise or has
Question about Chrysler Town & Country
...serpentine belts. I have installed A new motor mount bracket yesturday thinking it was the idler pulley but tonight it shreaded another new belt. Any ideas guys. Thanks in advance for any ...
Question about Chrysler Town & Country
...serpentine belt pulley broken on AC,3.8 engine Dorman Products makes a special bracket & idler pulley assembly for most popular American vehicles like yours. It is installed so that you
how to replace idler pully Go to harbor freight and buy a timing belt removal tool ($45). Remove the passenger tire and cover behind the tire. You should see the timing belt. Pull down on the idler ...
389 questions posted
Usually answered in minutes!
1,229 Questions
1,289 Questions
1,079 Questions
746 Questions
666 Questions