...GM is aware of this and said its normal on our cars. I own a 2007 Cobalt, and I have never experienced this before. Mine currently has ~15,000 miles on it, and the only ticking noise that I have ...
4 wheels are of the ground. Start vehicle, Place in Drive and see what kind of noise you are getting under no load. Hmm, hmmm,. hmmmm noise (humming) Thats bearing. Have someone turn the wheel and see
...4 minutes, but the noise is just short 10 to 30 seconds bursts. In cold weather (less than 30 degrees), the noise is louder. If I have the radio on, I won't hear it inside the car. Once the engine is ...
4 cylinder takes more) My best guess as to the cause of the lifter noise could come from minor deposit build up accelerated over time by the engine circulating a small (IMO) quantity of oil more often
Question about Chevrolet Cobalt
...UR OIL LIGHT TURN THE IGNITION ON-AND STEP ON THE GAS PEDAL 4 TIMES AND UR OIL LIGHT WILL BE RESET THIS USUALLY HAPPENS WHEN YOU DO A OIL CHANGE UR SELF THIS ARE TRICKS THAT THE GM HAVE HOPE THIS ...
...4.3L balance shaft design. 139k miles and 180psi on all cylinders. Loud rattling noise just over 1K rpms. After tearing down motor.. inspected anything that would create this noise. Upon removal of ...
Question about Jeep Cars & Trucks
4 hi makes grinding noise like it pops out of transfer case GEARs. A/T auto GM has 6inch lift and other extreme mod's jeep has 2003 Chev avalanche LS5.3 ENGINE AND GM 4L60E TRANS WITH A 6" Lift (ouch)
...4 days later a loud ticking sound started that gets faster as I accellerate. Valves and lifters were checked and are fine. Now I'm told it is the bottom end and I should replace my engine with a ...
Question about Chevrolet Cobalt
...GM started making this size of motor. with every thing in place tighten rocker nuts down until about 1/16" threads is protruding above nut. once the car starts allow the engine pressure to build and ...
GM engines. try to know there are lots of 2L. most are. j20 and j20b the b has VVT valve. my guess is you ask if the chain where to slip (jump teeth or snap) can there be engine, damage. for sure. the
777 questions posted
Usually answered in minutes!
1,428 Questions
818 Questions
212 Questions
74 Questions
42 Questions