How do you install a new drivers side headlight assembly for a 08 Jeep Compass Ugh u have to remove the bumper cover I have done this its not fun if u have a lift makes this a whole lot easier.
...drivers). But you dont need to remove the whole liner and all the screws. Just remove only those screws and retainers nearest the headlight and front bumper area. Just enough for your arms to reach ...
drivers side remove two screws in the light assembly (one in the plastic strap that holds the light assembly to the core support and at about 11 o'clock) this will allow you to pull the lights about 1
Question about GMC Sierra 3500HD
...drivers side headlight unit The 2008 GMC Acadia uses a No. H11 bulb for the low-beam and a No. 9005 for the high-beam headlight. Unfortunately, because of the design of the Acadia, you have to remove ...
...Remove insulation from the end of the cut lead and the harness. Recommended strip length is 9.5 mm (3/8 in.) Caution must be used to prevent cutting the wire strands. 4. Position stripped ends in ...
Question about GMC Sierra 3500HD
...remove the drivers' side door fuse to get rid of the nuisance symptoms. I did this and it stopped the symptoms, but that isn't the final fix obviously. I hope that someone may know ...
9 questions posted
Usually answered in minutes!
1 Questions
3 Questions
3 Questions
27 Questions