2008 GMC Acadia "back blade change wiper" Questions

Ad

...blade so that it forms a ' T ' with the arm. #5 Turn the blade back to the normal position in line with the arm. #6 Ease the wiper arm and blade back against the windshield. #7 You are done. Good ...

Ad

...blade to "flop" back and forth as the wiper direction changes. I hope help you with this (remember rated this help) Good luck. The blades are changed as a whole unit, these days, and not just the ...

Ad

...a chattering noise when theblade is not properly balanced allowing the blade to "flop" back andforth as the wiper direction changes. I hope help you with this (remember rated this help) Good

Question about GMC Acadia

2 Answers

...see a clip. Press it and push back to slide the wiper blade off. To install just slide the new one on till you here the clip snap to lock it in place. the process can be tricky. search for a

...back the blade assembly and a gap should form at one end so that you can slide the blade out from the the flex portion of the assembly. Then just stick the new inserts in the way you pulled the old ...

...blade there will be a little plastic tab or lever that needs to be depressed and held down while you slide the wiper off of the pin on the wiper arm. pivoting back and forth with the wiper will help ...

back down if I trying to turn the key off once the wiper is in top position. Please help. thanx :) try loosening negative battery clamp,w/ key on acc.& wipers on,remove cable when wipers are up. I

...back from the windowscreen and here is a black plastic clip half way down the wiper blade press that and pull the blade down wards and refit the same way, mesure the blade in inchs so you get the ...

Question about GMC Acadia

2 Answers

...back of the new wiper blade pacakge. rewriting those instructions, without the illustrations, here would accomplish what? take the car to autozone or advance and let one of their guys sell you a set ...

when you disconnect it. The replacement blade may have a clip on it which may need to be removed. Place the replacement blade in the same orientation as the one that was removed and clip back in place

Not finding what you are looking for?
Cars & Trucks Logo

666 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2007 GMC Acadia SLE
2007 GMC Acadia SLE

221 Questions

2009 GMC Acadia
2009 GMC Acadia

171 Questions

2010 GMC Acadia
2010 GMC Acadia

43 Questions

2011 GMC Acadia
2011 GMC Acadia

51 Questions

2013 GMC Acadia
2013 GMC Acadia

11 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...