2007 Dodge Ram Truck "recirculation door" Questions

recirculation door is inop... was wondering if someone had any info on where acuator was... or any tips on repair these truck are notorious for breaking recir and blend doors. if its reci break it out

...runs the recirculation/fresh air door,one runs the blend door (hot/cold) and one that runs the mode door that is the most likely cause of your problem.let me know if this helps or you need more

...recirculation door laying on top of it. They had a tendency to break and land on top of the blower creating a noise and blocking air flow. You can do one of two things here, replace the recirc door ...

recirculation door is probobly broken off which is causing poor air circulation, or there could be leaves etc in the blower motor baldes. Found this answer on another site: I had the same problem this

...recirculation door being broken, allowing hot air from outside to enter the cab of the truck. The dashboard will need to be removed to access the area. Check the filter in the cab of the truck, they ...

door to provide access to the recirculation duct assembly. Disconnect the vacuum hose from the end of the vacuum motor and the motor arm retainer from the door crank arm. Remove the two nuts retaining

door and pushing the recirculation button the door moves. Where can I get a diagram of the recirculator door so that I can better diagnose the problem? Is there anything sle that might be the problem?

recirculation actuator with the door shaft and rotate into position. Install the recirculation actuator screws to the HVAC module and tighten to 13 inch lbs. (1.5 Nm). Connect the electrical connector

...Recirculation Door Replacement for a 2006 Dodge Ram 1. Check to make sure it is actually your recirculation door. You can check that very easily by undoing the three bolts that attach the fan motor ...

...recirculation door is most likey stuck. You should be able to see the door if you take the cowl and wirers off. If it's stuck the actuator or the door is binding. Hope for the actuator not the door. ...