2008 Chrysler Town & Country "top plate strut" Questions

...when you compress the spring? I would not suggest doing this unless you have a wall wounted strut machine...super dangerous.but if you want they have quick struts with new strut, coil ,and top

top of the strut to the vehicle. The rubber in the center of this plate has failed. What you are hearing is the strut banging back & forth inside of this plate. What you need to do is remove the strut

top where struts piston mounts. These plates are usually overlooked during strut replacement. I recommend the plates be replaced with struts. And remember strut manufacturers only give struts a 25,000

...plate that locates the top of the strut to the body, Inside this plate is a centering device that holds the top of the strut vertically secure. As the mount wears, the strut is no longer vertically ...

from right front end when suspension works up and down. Strut? Broken Bolt? sounds like the top plate for the strut is bad, i beleive you may be able to just replace the plate and not the whole strut

...nut at the top of the piston, the top mounting plate, and thrust bearing from the strut. 8) Reassemble these components on the new strut and reistall the strut in the vehicle, opposite of

...top nut Remove old broken spring Compress new spring and put it in place on the strut Put strut top plate on and secure locknut Release spring compressor. Reinstall strut assembly in car. Good

top plate It is on the very top of the strut/coil assembly, holding the strut and spring rigidly under spring pressure.  This is the plate that can't be removed until the spring is compressed

...for the strut top plate? i have the shock then the spring then the plate then the strut mount. whats the name of the plate and where can i get it? Strut Mount Go to Rock Auto.Com --- you will see ...

...shock plate in a hyundai trajet Have to remove the strut assy & put into a strut spring compressor at a repair shop, to remove the top bearing plate Car has to be aligned afterwards Do both ...