...back exposing the wires and look for the black wire. Gently tug at this to see if it's broke. This is generally the wire that breaks as it's the thickest and flexes everytime you open and shut the ...
PUT AIR IN TIRES AND THERE WAS A NOISE IN THE BACK WHEELS AND NOTICED HOT AIR COMING FROM AIR CONDITIONER AND A HOT BURNING SMELL SIMILAR TO RUBBER BURNING. I HAVE A 2005 CHRYSLER TOWN AND COUNTRY VAN
put back ON the lug nuts - securing the rotors. Appying the Eemergency Brake. With a partner behind the wheel and you up front: Start the engine and put into forward gear and run. Apply the brakes and
Question about Chrysler Town & Country
...back side of the backing plate and use the needlenose to twist it out of it's holder to get the shoes off, then clean everything with brake cleaner (get it at the parts store with the parts, 2 cans ...
...back on the hub. now put your rubber wheel cover back on and securing it around the backside of the hub and reinstall your temp and audio buttons and secure the 2 screws in the back to attach back to ...
...put on the front and back but that that wouldnt cause it to do what its doing. Nobody can seem to tell me whats wrong with it and I dont know what to do... HELP!!!! You indicate your brakes were soft ...
...put back and all the 8mm nuts are firmly on if your missing a nut then that cold be your problem also. We can get by with out a nut thinking well its holding up NO every nut presses the lights firmly ...
...back of the van and put some kind of support under it ( safety first ) and wile turning the rear wheels by hand have some one apply the brakes the wheel should stop immediately and then wile keeping ...
hot ? I noticed after backing up the noise was barely audible or completely gone. I did this several times and then the noise wasn't there at all when moving forward. But it came back eventually after
Question about Chrysler Town & Country
...back of engine). Remove the plug leads and the unscrew the plugs. Replace with the new plugs being careful not to overtighten them and replace the plug leads onto the correct plugs. Check your engine ...
630 questions posted
Usually answered in minutes!
1,229 Questions
1,289 Questions
1,079 Questions
746 Questions
666 Questions