2007 Lexus GS 350 AWD Sedan "open bleeder compressing piston" Questions

Ad

...bleeder valve open - any tips would be greatly appreciated. The first two (1 -front and 1 - rear) worked just fine. The last one (Right Rear) will not compress. sounds like piston has failed in ...

Ad

Question about Lexus GS 350

1 Answer

open the bleeder. if you are haveing problems compressing the piston with the bleeder screw closed you may have a siezed caliper or collapsed brake line. if you still can't push the piston in with the

Ad

...hose or get air in the master cylinder....usually by running it too low in fluid level. If you are just changing the pads....no, you don't have to open the bleeder. PLEASE DON'T FORGET TO

...Open the bleeder port on the caliper and put a flat piece of metal across both pistons and compress them with a C-clamp. When you have them compressed close the bleeder port and remove the clamp and ...

...bleeder valve, open it. Now it should be a lot easier to push back and open. Once open all the way, close the bleeder valve and replace brakes. Get a $3.00 bleeder kit and bleed the brakes before you ...

...bleeder is open, Frum brakes same.make sure cup is iserted with flat towards oiston, open bleeder if a two piston cylinder befor yrying to compress. Good luck On disc brake piston make sure it is ...

...bleeder open, the piston may be stuck. Also, so you know, some pistons on those model turn in and not push in. You can view a free online repair manual for your subaru at: www.autozone.com It is free ...

...well. Try with bleeder cracked open slightly, pry with one hand, and while piston retracting, and you have clearance you need, tighten bleeder. As long as fluid is coming out, no air will enter

...Open the bleeder screw and use a C Clamp to compress it down ten close the bleeder screw. They also make a tool to compress the caliber as well but open the bleed screw or you could damage your

open the bleeder screw. To compress the piston I use a large C Clamp then close the bleeder screw. They also make a tool to compress the piston. either ay open the bleeder scew. I have seen people not

Not finding what you are looking for?
2007 Lexus GS 350 AWD Sedan Logo

101 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...