...sit then went to work with hammer on back of rotor. no go. do they come off the same as the front rotors or what extra needs to be done to remove the rear rotor. tks don The 'WD' stands for 'Water ...
...extra safety in case the car-jack slips. I make sure my car is SECURELY and SAFELY held up on the jack and I always put some additional level of support under the car (I have used a cinder block on ...
...extra safety in case the car-jack slips. I make sure my car is SECURELY and SAFELY held up on the jack and I always put some additional level of support under the car (I have used a cinder block on ...
...stand on the frame, and release the jack (don't want the car to fall on you), and do the other side also. now the hard part is done. grab the oil container(for the used oil) and slide under the car. ...
...sit overnight and keep bottles of new fluid outside at the same temperature 1. open fill plug- always do this first 2. Place a clean drain pan under the transmission 3. open drain plug 4. Remove the ...
...extra person. Have him sit in the vehicle and pump the brake pedal several times to build pressure and remove the brake assist reserve. Open the bleeder valve and have your assistant pump the pedal ...
...for these rather inexpensive items. In a lot of cases, the studs can be removed from the hub as it sits, but there are cases where the hub must be removed from the vehicle for stud replacement. You ...
217 questions posted
Usually answered in minutes!