2007 Lexus ES 350 "final drive gear ratio" Questions

final drive ratio change I need to know if it is possible to change the final drive ratio of a 1982 Porsche 944, and if so , what options are available and how do I go about it? change the pinnion and

...final drive ratios,all monitored by the computer with electronic speed sensors.If the trans from the 95 has a different ratio than the 93,the computer will set gear ratio error codes,and possibly put ...

...The closest I can find is 1st---3.15---2nd--1.91--3rd--1.28--4th--.95--5th--..76 rev--3.62 and final drive (diff ratio )3.59. You can check these at a ford dealer ship in the workshop manual ...

...ratio in the transmission and the final drive. The only way to change this would be to change the final drive ratio in the transmission, and there likely are no aftermarket solutions available to

...final drive ratio to tell you which size tire would do best. Bigger tires will bring your Cruising speed down but also your performance. Here is the formulas you can use to figure it out. RPM = mph x ...

...final drive ratio (lower) and a transmission with closer ratios which meant a higher first gear ratio - hence the lower final drive ratio. From memory the solenoid protruded around 3 inches from the ...

rpm, divided by transmission gear ratio, divided by final drive ratio, times tire circumference (tire diameter times 3.14) However, the electronic governor limits the 2001 expedition to around 100 mph

...final drive gear ratio is the same. Even if it wasn't, it would still work, but then your speedo would be off. (Ratio MUST be the same if it's a 4X4) You should check at ...

...SPECS SAY THE FINAL DRIVE RATIO IS 3.685 TO 1 IS THAT ENG SHAFT TO DRIVE AXLE RATIO? Yes, rear end only. If you have overdrive gear in your tranny, the engine to axle ratio will be lower in

2000 270 7.4 bravo3 what is the gear ratio not enough information to get the answer fault code reading , final drive ratio or what ? post it all again as posts are not linked