2007 Mazda MAZDA6 "transmission shifts hard times 2005" Questions

...transmission will knock HARD when its shifting into 2nd gear....Should I worry? 1. some mazdas had a PCM/TCM update to resolve 1st to 2nd shift shock. the only one who can update the is the dealer. ...

...hard? I have a 2005 Mazda 6 with just under 60,000 miles on it. Is it normal for these to break or could it have been done during one drive? when driving you can' t just shift it that easy . when you ...

...shifts hard from 1st to 2nd like it has a shift kit, fluid is clean and level is good. This usually happens when the car is cold and most times gets better when transmission heats up. Is there any ...

...hard the AT light will come on and then it will stay in 3rd gear. Check transmission fluid. If that is full, try changing the fuel filter. It could be starving for gas, and trying to shift but can't. ...

...transmission is hard to get into first gear manual transmission is hard to shift into first gear Time to rebuild Good luck mai Hi i have one 2005 pontiac sunfire manual and i what to know were i can ...

...shifts... You should go right away to a nissan dealership. Your Trans cooler may be mixing your coolant and transmission fluid. After time your transmission will start shifting hard or have a delayed ...

...transmission shifts hard My Impala shifts hard from time to time. I have had this problem with a chevy venture also. It only happens periodically and I can temporarily fix it by pulling over, turning ...

...transmission service. Hard thunking shifts when starting or stopping with no other apparent symptoms on older vehicles can usually be corrected by a transmission flush. if you pull out your tranny ...

...transmission was flushed by a local mechanic. Since then, the van hard shifts around 25mph. Is there something else that I need to look into or has my transmission been "messed up". try ...

...hard or hesitate to shift.and make sure you only use dexron transmission fluid in it for some reason that fluid works best in them.also mechanic might be able to clear the code for you and it may not ...