when i first start the truck, my front brakes grab... anyone have any suggestions? remove the pads and cut a horizontal groove in them with a hack saw
...saw is basically the same as the one described above except that instead of just a horizontal rigid plastic bar, this one is a rigid plastic also but it holds onto the whole battery. is is like a ...
...horizontal plastic cross brace that kept the dash assembly from warping during manufacture. Cut with a hack saw at each end of the plastic brace and remove it. You'll notice a metal cross brace that ...
...saw that there was play on the flywheel when you try to turn it in any direction and that there is no movement at the front on the cam-belt side.I then removed the sump and discovered that the ...
...when driving on tarred roads. take the pads out,cut a horizontal grove in each pad with a hack saw in the middle and this should cure it ,old trick from when disk brakes first came out but it works
saw if necessary. I had bad ball joints and the control arm mounts and bushings appeared corroded and worn. On many messageboards I found debates about replacing the ball joints only
307 questions posted
Usually answered in minutes!
754 Questions
686 Questions
491 Questions
178 Questions
134 Questions
