2007 Volkswagen Jetta 2.5 Sedan "blend door actuator module located" Questions

Ad

...blend door actuator (10). Blend door actuator and related components Remove the blend door actuator mounting screws from the HVAC module. Remove the blend door actuator as an assembly with the ...

Ad

...blend door is not working? If yes, it's the control head or the temp blend door motor on th plenum case under the dash. Buy used on ebay. DO you have manaul or electroic controls? If electronic A/C ...

Ad

...Blend Door Actuator The A/C electronic blend door actuator is located on the rear of the A/C evaporator housing assembly. Its function is to move the A/C air temperature control door on command from ...

...blend door hoses flushed system Are the heater hose from the engine compartment going to the fire wall hot to the touch ? Is the HVAC - heating , ventilation an A/C system manual or automatic ? ...

...blend door keep faulting? 2010 fusion. hvac moves to heat without changing dial after driving. 2 new blend door actuators, four seasons, and motorcraft have been installed and the problem persists. ...

Question about Hyundai Cars & Trucks

2 Answers

blend door actuator is not working I have a 2008 Hyundai Elantra GLS and one day the temperature control would not blow hot air. I narrowed down the problem to the HVAC Heater Blend Door Actuator. The

...blend door actuators on my 2005 buick lesabre Did you replace them ? If not working correctly you probably need to replace it. Do you hear a clicking noise behind the dash ? Does your buick have ...

...blend door actuator located on a 2007 Pontiac Grand Prix ! Pontiac doesn't call it a blend door actuator . There are Air Temperature Actuator - Left : Air Temperature Actuator - Right Mode Actuator ...

Blend door for front temp control is stuck in the 'cold' position this winter. Is there a way to manually move and fix the door to get some heat? you have to replace the blend (heat/cold) door motor, ...

Question about Volkswagen Jetta

2 Answers

...blend door. If the rear is working well and front is not I would suspect a blend door or actuator issue in the front.Double check and see if you can hear anything moving when you are adjusting ...

Not finding what you are looking for?
2007 Volkswagen Jetta 2.5 Sedan Logo

786 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Volkswagen Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Bradley
Bradley

Level 2 Expert

105 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...