Question about GMC Yukon Denali
...loose, the only thing you can do is unscrew and pry off the inner door panel and once inside the door, tighten up the connections. Try looking at this informative YouTube.com video: ...
Question about GMC Yukon Denali
...loose. I assume I need to remove the inside panel to tighten bolts for handle. the handle on the driver side door is loose. I assume I need to remove the inside panel to tighten bolts for handle. Yes ...
...loose, re-tighten and re-install the inner door panel. If the handle pivot mechanism is worn or damaged, pick up a replacement (these are available on ebay at a reasonable price). Caution: if you're ...
Question about Cars & Trucks
...loose them they tend to fly out then look in the hole determine what type of driver it will take to tighten it most are a 10mm socket tighten and reverse the plugs be sure not to over tighten and ...
Question about GMC Yukon Denali
loose, can i tighten it or do i need to replace it? It still works though. I assume that the entire handle unit is loose in the body work of the door. The interior door trim will need to be removed to
tighten door handle exterior drivers side door handle is loose. need to tighten? There's probably a bolt on the inside edge door
Question about GMC Yukon Denali
The licence plate light and back door handle cover is loose on my Mitsubishi 2003 montero how do I tighten it up? inside rear door panel remove panel to tighten handle
Question about Cars & Trucks
...at the hinge , same with the outside handle if its loose it may just need tightening or it may have also broke at hinge area. you will need to remove the door panel to get a better look at
Question about GMC Yukon Denali
...door handle has come loose on my honda sedan, any ideas how to tighten it before it falls off? There should be retainer nuts on the inside. You would have to remove the inner door panel to
...loose How do I tighten the handle? The handle/pull lever slid down and also wiggles. I have to open from the inside. I removed the inside door panel and the metal plate but did not remove the clips ...
513 questions posted
Usually answered in minutes!
561 Questions
369 Questions
167 Questions
170 Questions
162 Questions