2007 GMC Sierra 1500 "truck radio working" Questions

I have a 2003 GMC Sierra 1500 and it has a factory CD/Radio Bose system. The radio works fine but can't get the CD player to work, it won't eject or load a CD. I recently had an ignition fusible link ...

it is dry outside, the radio works pretty good but when the humidity is up, speakers dont work and sounds like treble in the other speakers. I am to the point as to put a aftermaket radio in the truck

...truck does not start lights and radio are on . the starter does not turn over.there no clicking well i was driving and my truck just died ,no starter and lights radio works .the main starter fuse was ...

radio works, cd is stuck and will not eject. Tried everything except removing radio/cd I had similar problem on 99 tahoe disconnect the battery wait a few minutes and reconnect cd should pop out on ...

D TC B1025 AND B1045 ENGINE CODES does your radio works? this dtc sets when the left channel of audio system failed, remove radio and check speaker wires for short or oen, if good change the amplifier

I just bought an '06 Sierra and found that some of the lights on the radio don't work. It's like a section of them don't light up. Your best bet, hit a junk yard and check around for a replacement. ...

...working again for a day and then went back back to being very low volume. Hi It sounds like it would more than likely be a short from some where within the wires probably a speaker wire try turning ...

Radio on but no sound and door chime not working Happens occasionally. When you open the door with the keys in the ignition the chime/alarm doesn't come on. At the same time you will notice ...

...truck,the loc is on the radio.how can i unlock it. don't know the code for it. thanks for any help! Taken from: http://autoforumz.com/Pontiac-Help-u...pict40505.html GM DELCO THEFTLOCK RADIO ...

Alternator feeding back through speakers From boats82373, You mentioned a bad ground. Would that be in the alternator, the radio, or elsewhere? Both the alternator and radio work fine now. Is it ...