power seat My power seats don't have any power. Where could the problem be? CHECK TO SEE IF YOUR GETTING 12VOLTS TO THE POWER CONNECT UNDER THE SEAT WITH THE KEY ON WITH A TEST LIGHT OR VOLT METER . ...
...power seat & both heated seats don't work? Wher eis the fuse located at ? Check fuses, if blown replace then try the power seat and heated seats at the same time....make sure proper rated fuse is ...
...One will be for the heater, the other for the power seats. I don't think it's all one connector, but if it is, the power seat will not work. Pull the plug under the seat or disconnect the ...
...power going to switches but not to the motors There is a seat module under the seat that reads the inputs from the switches and then sends power to the motors, disconnect and reconnect and it may ...
...I replace the power driver's seat in my 1995 GMC Yukon with a manual seat? If you choose to you can buy will just have to tuck away all the wiring from the power seat module that was put on your ...
...power seats to the forward position..the seat moves backwards and visa versa. It shouldn't be possible to invert connector plug but what ever you did prior to this situtation is suspect ! Try ...
...of the seat to the floor pan there could be covers on these to remove the bolts and then tip the seat forward and unplug the wire connector for the power seat(if it has this option).hope this ...
...power for seat movement and heat are from different sources, but all the wires go thru the same connector. That connector may be under the seat and may have been subjected to spillage or otherwise ...
...seat electrical circuit is the way to find out . Plus testing . There is no relay involved in the operation of the power seats . Does the vehicle have memory seats ? Do you know what a wiring diagram ...
548 questions posted
Usually answered in minutes!
593 Questions
524 Questions
309 Questions
238 Questions
255 Questions