Sirius Stiletto 2 Portable Satellite Radio Receiver "not turn off" Questions

...turn it off. I've tried to "fix" it by following troubleshooting steps in the manual, unplugging all the connections and plugging them back in, resetting the factory defaults, and turning off the ...

...turn it off with the BUTTON - not just by turning off the car. Give it a try using the radio's POWER BUTTON for on and off, NOT just the ignition, then it will remember the channel most of the time. ...

not just turn off the car or unplug it. Next, make sure your 'sleep timer' isn't set. Next, check your antenna signal level and make sure you're in a location that has at least 2 bars - move until you

replacing? No battery. Always turn it off with the POWER switch, not just pulling the plug on the radio or taking it ouf out it's base. Using the POWER switch, then it will remember for a little while

...not sound so bad but gets annoying over time. I do have a current subscription. Are you using the POWER button to turn it off, or just shutting off the car? Using the "power button" will usually help ...

...not turn on the Delphi XM Xpress on car unit I have 2 delphi Xpress XM units that work great on home kit. But when I use them with car kit, the remote doesn't turn on the unit. I have to turn it on ...

...turn off power by removed power cord and machine can not on off funtion I used pc to down load again ( only older pc , it has old conection from pc to viewsat. You must buy a cable by viewsat company ...

channel . I can;t change channel and I can't turn the st2 off,I have to unplug it to turn it off. Also this st2 gets pretty hot. Was not worth the money.. Try finding the reset. It's usually a pinhole

...till the tv screen goes blank then put your card back in turn your box back on and try to record 2 channels at the same time this should solve the problem. if not it will be the cable or the quad

...turn off the Roady2 using the POWER switch. Do NOT do this by turning the car on and off as it tends not to save any settings when you do that. Always use the POWER button. Also, the website ...