card in apply gental pressure to push out the plasic and at the same time lift out the logic board, remember to lift up the microphone at the top left. 8/ Wala theres your battery it is taped in place
...hold the front of the unti to the back of the unit. Remove these screws, take care, they are small, and when you replace them do not over tighten them. They are not phillips type screws, they are the ...
...hold the power button for a long time (30 seconds). The last and potentially warranty voiding solution is to pull off the front face plate. Remove the four tiny philips head screws. The front face ...
...card root directory Right Click>New>Folder. Name the New Folder Garmin and paste your Gmasupp.img into this folder. The other option might work ( Remember this option work with most of the nuvi ) You ...
...card to pry all the way around is best that it won't leave scratches. Don't force it, just be patient. Once you have that off, remove the screen from the case. I did it by pushing with light-moderate ...
Question about Magellan Maestro GPS
...card to pry all the way around is best that it won't leave scratches. Don't force it, just be patient. Once you have that off, remove the screen from the case. I did it by pushing with light-moderate ...
Question about Magellan Maestro GPS
...hold the power button for a long time (30 seconds). The last and potentially warranty voiding solution is to pull off the front face plate. Remove the four tiny philips head screws. The front face ...
lift the screen out. It may need some leverage, but be careful not to put the screwdriver to far behind the screen as there are a couple of thin cables for the connections. 6) To remove the hard drive
...card if applicable 2) remove all (four) security screws with a special screwdriver 3) gently lift the casing away from the screen paying particular attention to any wiring like the speaker wires. 4) ...
142 questions posted
Usually answered in minutes!
285 Questions
166 Questions
54 Questions
51 Questions
39 Questions