...carpet edges since the suction end ( which has a roller with the brush) will grab open fiber ends. You should use an attachment or floor tool when cleaning open edges of your rug or carpet. Most ...
Question about VAX Appliances Vacuums
roller. To Adjust the height of your vacuum cleaner, put the vacuum cleaner on carpet using the lowest setting and turn it on. Pull the handle back while slowly twisting the knob to raise the sweeper.
Rollers are to low and tearing up carpet. How do you adjust the rollers height so it does not tear up carpet? Vac. as well as the carpet are new. Thanks DB unfortunatly you cant adjust the height on ...
Question about Vacuums
...carpet mode, I do not hear the motor change sounds like I use to and the roller won't agitate. In the past, I had a problem with the vacuum slipping out of carpet mode while in use. The repair guy ...
...carpet nap back up. We have a frese carpet, but after vacuuming the footprints are still visible. Is the belt to the roller brush installed correctly? Check the height of the machine from the
Question about Miele Vacuums
...roller brush for electric carpet cleaning head Bristles no long enough to pull lint up off carpet, suction is fine just can't dislodge fibers from carpet to allow suction to do its job The ...
...to roll the brush on carpet. If it dose not roll off carpet at all the brush bearing are locked up. You may be able to remove the roller and check theme. Most likely you wil need a new roller
...up and melting the inside of the brush roller, this is a windsor expert carpet extractor There brush bearings are seized. See the diagram HERE On page 16, part numbers 14 and 19 need to be ...
...roller spins until it touches the carpet, then stops. I have already replaced the belt and it continues to stop when it touches the carpet EITHER THE MOTOR BRUSHES HAVE WORN OUT, OR THE BELT IS ...
88 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions
