Frigidaire 30" Self-Cleaning Freestanding Electric Range - White-on-White "unplugged doesnt work" Questions

Oven doesnt work Our G70m cooker isn't working, when we turn the oven on it wirks for 5 mins then it turns off by its self. you have a short most likely try to unplug for about two mins to let reset

whirlpool accua bake how do you unlock the oven Hold cancel button for 10 seconds if this doesnt work unplug unit for 60 seconds and replug

...doesnt work the code E0-F3 comes up. i have the manual and have tried what they said to do but it doesnt work. i have bought a new sensor E0-F3 The error code message F3 E0 indicates an open oven ...

...doesnt work all other options on controll panel work Hello D Scott - Sounds like the range is either experiencing a wiring/communication error or a faulty EOC. Try resetting the unit by unplugging it ...

...unplugged it and plugged it back in...still nothing. when i turn one of the burners on,,the clock turns on... i am able to turn on the light and all the buttons work....but the burners do not work... ...

magnetron fan runs all the time found a bad thermal switch on the magnetron fan, replaced switch and no the fan runs all the time. Microwave works as needed but the fan doesnt shut off The timer that ...

...DOESNT WORK YOU WILL NEED TO PULL IT OUT AND REMOVE THE BACK PANEL ( UNPLUG IT BEFORE YOU WORK ON IT) THEN LOCATE THE DOOR LOCK MOTOR AND ROD, SOMETIMES THE ROD NEEDS ADJUSTING, SOMETIME THE MICRO ...

...doesnt work unplug the unit for five minutes and dont cheat five minutes or turn the breaker off. After five minutes if the control still says the same thing chances are you have a stuck or shorted ...

...DOESNT WORK YOU WILL NEED TO PULL IT OUT AND REMOVE THE BACK PANEL ( UNPLUG IT BEFORE YOU WORK ON IT) THEN LOCATE THE DOOR LOCK MOTOR AND ROD, SOMETIMES THE ROD NEEDS ADJUSTING, SOMETIME THE MICRO ...

...doesnt help re post there is some board work to do, i would suggest a tech do this part though. always unplug range when you work on them! good luck. ...